VSCOM NetUSB-400i Manuel d'utilisateur télécharger pdf (Page 29)

4 Windows Utility

Figure 41: Settings

Check the Edit Settings box to allow change of the conﬁguration. Auto Start Device Mapping be-

comes available, check that. Then click the Save button.

The Device Mapping now starts automatically when a user logs on.

4.5.2 Auto Start without a User logged on

Especially on Server Systems it may be necessary to have the USB devices available. But Server

systems typically do not have a user logged on to the system. Usually the task of Device Mapping

is done by an installed system service. However the USBIP Admin Utility does not provide such a

service function. It is necessary to use a workaround. This is described here.

First conﬁgure a user account on the server responsible for management of USB devices connected

to NetUSB-400i USB Server. The system administrator account will do. Using this account prepare

the conﬁguration as described in 4.5.1 above. Now when this user logs on the USB devices become

available.

Next create a new Scheduled Task, which shall run the USBIP Admin Utility software. Conﬁgure

this task to run When my computer starts. Also conﬁgure this task to run as the deﬁned user

account, otherwise the device conﬁguration is not available.

Now when the Server System starts all services are started. Late in this process the USBIP Admin

Utility software is also started. It automatically starts Device Mapping, and detects the connected

USB devices. The devices then operate as deﬁned by the conﬁguration. They can connect to the

system, or printers may stay as shared.

October 2009 NetUSB-400i User Manual 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

VSCOM NetUSB-400i Manuel d'utilisateur Page 29