VSCOM NetUSB-400i Manuel d'utilisateur télécharger pdf (Page 22)

4 Windows Utility

Click Update to apply settings for the USB Server box. If the entered IP Settings are correct, then

the Quick Conﬁg utility pops up a dialog to save and execute the settings.

Figure 30: USBIP Conﬁrm Quick Conﬁguration

Click on the Yes to apply changes.

4.3 Device Mapping

Device Mapping enables virtualization of all USB Devices connected to the NetUSB-400i USB

Server on to your PC, over LAN. Power on the NetUSB-400i USB Server and connect an Ethernet

cable from the Ethernet port to your Local Area Network. Select Device Mapping in the Func-

tion Panel. Then click on the Green Arrow Button in the USBIP Admin Utility to start the device

mapping. Right-click on the icon and selecting Start Device Mapping is also possible, es well as

invoking this function via Device Mapping in the Menu bar.

The Windows USBIP Admin Utility is capable enough to identify the NetUSB-400i USB Servers by

their IP address on the network. As soon as the NetUSB-400i is detected with a speciﬁc IP Address

Windows automatically invokes a Found New Hardware Wizard to install the drivers for the USB

Server. Continue the Installation to see the NetUSB-400i and the USB devices connected in the

USBIP Admin Utility (ﬁgure 31). During this process Windows might request a conﬁrmation,

because the drivers are not digitally signed by Microsoft. Just select the option to Continue the

installation.

NOTE: For proper enumeration of devices, allow the network traﬃc in the Firewall option on the

Windows PC. If you are using any third party Firewalls like Norton, McAfee, Zone Alarm etc.,

conﬁgure them to add USBIP Admin Utility to your Firewall’s exception list.

October 2009 NetUSB-400i User Manual 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Pas de commentaire

VSCOM NetUSB-400i Manuel d'utilisateur Page 22